Broken Overhead Door Spring Dangers

Do you have a broken garage door spring? It’s advisable to rely on a fast response service to prevent broken garage door spring dangers. Your garage door spring may break because of rust, age, or another reason. However, the important thing is to never ignore a broken garage door spring.

Additionally, you should be careful and don’t deal with your garage springs because springs are under high tension and can harm you or damage your car if your garage door fails. Avoid garage door spring problems today by calling Garage Repair Plano TX to get the best garage spring repair at a cheap cost. We are near you in Plano, Texas.

• Emergency Spring Services:

We understand that garage door spring issues can occur unexpectedly, disrupting your daily routine or compromising security. Our team is available 24 hours a day to address any urgent spring related problems promptly.

Steps for Installing a Garage Door Spring

• Materials and Tools Needed

Replacement garage door spring, Winding bars, Adjustable wrench, C clamps, socket wrench set, Safety glasses and gloves.

• Safety First

Disconnect the power to the garage door opener to ensure it cannot be activated during the installation process. Wear safety glasses and gloves to protect yourself from potential accidents.

• Identify the Type of Spring

For garage door springs, there are two primary varieties. springs in torsion and extension. Determine the kind of spring that has to be changed.

GARAGE DOORS PLANO OFFERS THE FOLLOWING SERVICES:

Garage Door Opener Replacement
Garage Door Spring Repair
Garage Door Opener Repair
Garage Door Installation
Garage Door Service
Garage Door Replacement
Garage Door Repair
Overhead Garage Door Repair

• Release Tension on the Existing Spring

If you're replacing an existing spring, use winding bars to release tension on the old spring. Insert the winding bars into the winding cone and carefully unwind the spring.

What Our Clients Say About Us

I'm so grateful with this service repair! My garage doors only agreed to be spazzing out anf the husband that repaired it had been excellent and skilled. He literally described exactly what happening and left me and my hubby with a few sound advice.

JENNIFER SMITH

Many thanks for that low cost you billed me for my garage door. The service work was fast and directly on time. couldn’t have requested for much better.

DAUGLAS MCNUN

Best garage doors repair shop so far. I'm so pleased with the outcomes, coupled with a enjoyable time using the team that aided me as soon as I known as these to the moment they left me.

HELLEN WRIGHT

• Remove the old Spring

Once the tension is released, use a socket wrench to loosen and remove the set screws on the winding cone. Slide the old spring off the torsion tube and take it out carefully.

• Install the New Spring

Slide the new spring onto the torsion tube. Wind the spring using winding bars in the opposite direction of the unwinding process for the old spring. Follow the manufacturer's instructions for the number of turns needed.

• Secure the New Spring

Once the new spring is wound, secure it by tightening the set screws on the winding cone. Make sure they are safely and evenly adjusted.

• Check Tension

Test the tension by lifting the garage door manually. The door should stay in place when lifted halfway and should not slam shut when released.

• Reconnect the garage door Opener

If you disconnected the power to the garage door opener, reconnect it. Test the door's operation using the opener to ensure it works smoothly and then check the safety cable installation.

• Test the garage door.

Open and close the garage door several times to ensure that the spring is properly balanced and the door functions without a hitch. Call us at any time.

Spring Repair Plano TX